tbs6909_1

TBS 6909

The Octa-Tuner TV Card is suitable for the reception of digital satellite TV to all HD resolutions. It has eight DVB-S2 Tuner, so you can record or watch up to eight channels simultaneously. It should be used directly with an Quad-LNB. With this card are 40 and more channels possible. It has drivers for Linux too.

Product Features

  • Digital satellite TV receiver card with 8 Tuners for TV and Radio reception
  • All resolutions and codecs (e.g.: 1080p, FullHD, 4K, MPEG, H.264, HEVC and many more) are supported, but also depending on your PC-hardware/software
  • Intern multiswitch
  • Standard Profiles Format
  • PCI-Express card (PCIe x1)
  • DiSEqC 1.0, 1.2, 2.x compatible
  • Unicable compatible
  • Linux operating systems
  • Receiving data, IPTV-Streaming, channel-/ data monitoring

Specification

  • Frequency range: 950 bis 2150 MHz
    Signal Level: -85 bis -10 dBSymbol rate: 1 bis 45 Msps
    Demodulation:
    DVB-S QPSK, DVB-S2 8PSK

    FEC:
    DVB-S2
    8PSK: 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
    DVB-S
    QPSK: 1/2, 2/3, 3/4, 5/6, 7/8

    DiSEqC support: 1.0, 1.2, 2.x

Connections and other details

  • Four satellite TV antenna inputs
  • Max. dimensions of the card (W x D x H in cm):  8 x 13 x 2
  • Weight: 0.13 kg

Minimal System Requirements

  • Operating system (32-bit and 64-bit): Windows ® XP, Vista ®, Windows 7 ®, Windows8.x, Windows10, Linux
  • CPU for SDTV: min. Pentium 3, 1 GHz or similar AMD Athlon or alternatively video decoding with graphic chip
  • CPU for HDTV: min. Pentium 3, 3 GHz or similar AMD Athlon (Dual Core recommended) or alternatively video decoding with graphic chip
  • 1GB of RAM recommended
  • Hard disk with min. 1GB free capacity
  • Graphics card with min. 64MB memory
  • Sound card with DirectX ® 9 support or higher
  • Available PCIe slot
  • Quad LNB

Package Contains

  • 1 x Octa-Tuner DVB-S2 PCIe-card (x1)
  • 1 x Power adapter cable
  • 1 x Drivers, Quick Installation Guide and Software as download

Windows TBS 6909 v1.0.0.3 (Older Windows versions)

Windows 10 TBS 6909 v1.0.0.3 (Windows 10)

Linux  (Link to GitHub)

Software

Hints

Wenn Sie quattro LNB verwenden, haben Sie 4 Kabel (V / L, V / H, H / L, H / H). Verbinden Sie das rechte Kabel wie in der Abbildung oben mit TBS6909 (Eingang 0 - Eingang 3 sollte an V angeschlossen werden / L, V / H, H / L bzw. H / H).

If you use quattro LNB, you have 4 cables (V / L, V / H, H / L, H / H). Connect the right cable to TBS-6909 as shown in the picture above (input 0 – input 3 should be connected to V / L, V / H, H / L or H / H).

2

If you use Quad-LNB, you can connect the 4 cables directly to the 4 ports of TBS-6909.

3

If you are using a single C or Ku band, two inputs are sufficient. All you need to do is connect the cables to input 0 and input 2 to provide the V and H signals.

4

If you want to use DiSEqC with TBS-6909, you can use this mode.

5

In some cases, multiswitches have more than one satellite input, you must first select the satellite.