tbs6909_1

TBS 6909

The Octa-Tuner TV Card is suitable for the reception of digital satellite TV to all HD resolutions. It has eight DVB-S2 Tuner, so you can record or watch up to eight channels simultaneously. It should be used directly with an Quad-LNB. With this card are 40 and more channels possible. It has drivers for Linux too.

tbs6909_1
tbs6909_2
tbs6909_4
tbs6909_5

Product Features

  • Digital satellite TV receiver card with 8 Tuners for TV and Radio reception
  • All resolutions and codecs (e.g.: 1080p, FullHD, 4K, MPEG, H.264, HEVC and many more) are supported, but also depending on your PC-hardware/software
  • Intern multiswitch
  • Standard Profiles Format
  • PCI-Express card (PCIe x1)
  • DiSEqC 1.0, 1.2, 2.x compatible
  • Unicable compatible
  • Linux operating systems
  • Receiving data, IPTV-Streaming, channel-/ data monitoring

Specification

  • Frequency range: 950 bis 2150 MHz
    Signal Level: -85 bis -10 dBSymbol rate: 1 bis 45 Msps
    Demodulation:
    DVB-S QPSK, DVB-S2 8PSK

    FEC:
    DVB-S2
    8PSK: 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
    DVB-S
    QPSK: 1/2, 2/3, 3/4, 5/6, 7/8

    DiSEqC support: 1.0, 1.2, 2.x

Connections and other details

  • Four satellite TV antenna inputs
  • Max. dimensions of the card (W x D x H in cm):  8 x 13 x 2
  • Weight: 0.13 kg

Minimal System Requirements

  • Operating system (32-bit and 64-bit): Windows ® XP, Vista ®, Windows 7 ®, Windows8.x, Windows10, Linux
  • CPU for SDTV: min. Pentium 3, 1 GHz or similar AMD Athlon or alternatively video decoding with graphic chip
  • CPU for HDTV: min. Pentium 3, 3 GHz or similar AMD Athlon (Dual Core recommended) or alternatively video decoding with graphic chip
  • 1GB of RAM recommended
  • Hard disk with min. 1GB free capacity
  • Graphics card with min. 64MB memory
  • Sound card with DirectX ® 9 support or higher
  • Available PCIe slot
  • Quad LNB

Package Contains

  • 1 x Octa-Tuner DVB-S2 PCIe-card (x1)
  • 1 x Power adapter cable
  • 1 x Drivers, Quick Installation Guide and Software as download

Download & Service

Windows TBS 6909 v1.0.0.3 (Older Windows versions)

Windows 10 TBS 6909 v1.0.0.3 (Windows 10)

Linux  (Link to GitHub)

Software

Hints

Wenn Sie quattro LNB verwenden, haben Sie 4 Kabel (V / L, V / H, H / L, H / H). Verbinden Sie das rechte Kabel wie in der Abbildung oben mit TBS6909 (Eingang 0 - Eingang 3 sollte an V angeschlossen werden / L, V / H, H / L bzw. H / H).

If you use quattro LNB, you have 4 cables (V / L, V / H, H / L, H / H). Connect the right cable to TBS-6909 as shown in the picture above (input 0 – input 3 should be connected to V / L, V / H, H / L or H / H).

2

If you use Quad-LNB, you can connect the 4 cables directly to the 4 ports of TBS-6909.

3

If you are using a single C or Ku band, two inputs are sufficient. All you need to do is connect the cables to input 0 and input 2 to provide the V and H signals.

4

If you want to use DiSEqC with TBS-6909, you can use this mode.

5

In some cases, multiswitches have more than one satellite input, you must first select the satellite.